Quick search
Go!

Modelling And Optimization In The Machines Building Field


Issue: MOCM - Number 5 (1999)

Editorial Board

Scientific Committee


MOCM - Issue No. 5 (1999)
Abstracts: 42 records

SAVULYAK V. I., ZHUKOV A. A.
FORMATION OF CARBON (CYANOPOLYNE) AND OF DIAMOND IN Fe-C ALLOYS

ZHUKOV A. A., SAVULYAK V. I.
THE STRUCTURE OF THE CEMENTITE PHASE IN THE CONSTRUCTIONAL ALLOYS ON THE Fe-C BASE

FORIS ANCA
EXPERIMENTAL RESEARCH FOR THE INVESTIGATION OF THE ACOUSTIC PROPERTIES OF SOUND-ABSORBANT MATERIALS

FORIS ANCA
EXPERIMENTAL DETERMINATION OF THE ACOUSTIC PROPRIETIES FOR THE "SANDWICH" STRUCTURE CONSISTING OF TEXTILE OFFAL COVERED WITH BITUMEN AND PVC

FORIS ANCA
THEORETICAL INVESTIGATION PRINCIPLES OF SOME ACOUSTIC PROPERTIES OF SOUND-ABSORBENT MATERIALS OF ROMANIAN MANUFACTURE

STAN GHEORGHE
FACTORS INFLUENCING THE POLYMER FRAGILE - DUCTILE BEHAVIOUR

RAVEICA IONEL, NEDEFF VALENTIN
POLLUTION PREVENTION IN PROCESS DEVELOPMENT AND DESIGN

MĂCĂRESCU BOGDAN
CURRENT PROBLEMS REGARDING ENVIRONMENTAL PROTECTION IN THE PRODUCTION UNITS WITHIN THE MACHINES ENGINNERING

POPOVICI IRINA, POPOVICI RADU
CONCERNING ABOUT ENVIRONMENTAL PROTECTIONS

NEDEFF VALENTIN, MOŞNEGUŢU EMILIAN
THERMIC BALANCE SHEET REAL SIMPLE AT DRIER FOR CEREALS

MOŞNEGUŢU EMILIAN, NEDEFF VALENTIN
HUMIDITY INFLUENCE OF PARTICLES ON THERE SORT AFTER AERODYNAMICS PROPERTY

NEDEFF VALENTIN, MOŞNEGUŢU EMILIAN
ASPECTS WITH ACTIVE LOOK AERATION AND DRYING CEREALS AND LEGUMINOUS PLANTS FOR GRAIN

RUSU PETRICĂ, RAŢI IOAN, NECULAIASA VASILE, NEDEFF VALENTIN
NECESSARY OF COLD CALCULUS FOR COLD DEPOT DESTINE APPEAL KEEPING

RUSU PETRICĂ, RAŢI IOAN, NEDEFF VALENTIN, MOŞNEGUŢU EMILIAN
THEORETIC CONSIDERATION SIGHT FRUITS AND VEGETABLES PRESSURE IN SEEING NATURAL JUICE OBTAINES

RUSU PETRICĂ, RAŢI IOAN, NEDEFF VALENTIN, MOŞNEGUŢU EMILIAN
DENSE FRUIT JUICES OBTAIN FROM BOX THORN FRUIT ON BREAK UP AND STRAIN MACHINE-TYPE PRESSING AND STRAIN DRUM

MĂCĂRESCU BOGDAN
SUSTAINABLE DEVELOPMENT OF FOOD INDUSTRY IN CORRELATION WITH THE ENVIRONMENTAL PROTECTION

BIBIRE LUMINIŢA, MARIN MARIUS, MARIN CORINA
THE POWER REQUIREMENTS OF THE AGITATOR

MARIN MARCUS, BIBIRE LUMINIŢA, MARIN CORINA
THEORETICAL RESEARCH CONCERNING ON DIMENSIONAL ANALYSIS FOR FLUID AGITATION SYSTEM

BIBIRE LUMINIŢA, GURAMBA GHEORGHE
BEHAVIOR OF FLUID VELOCITY IN AGITATED VESSEL

GURAMBA GHEORGHE, BIBIRE LUMINIŢA
BLENDING AND BLEND TIME

FLORESCU IULIAN, CĂLIMAN RADU
A NUMERICAL STUDY OF UNSTEADY LAMINAR FORCED CONVECTION FROM A CIRCULAR CYLINDER

FLORESCU IULIAN, CĂLIMAN RADU
UNSTEADY MIXED CONVECTION HEAT TRANSFER FROM A HORIZONTAL CIRCULAR CYLINDER

SAJIN TUDOR
THE DISPLACEMENT OF THE EQUILIBRIUM STATE BETWEEN LIQUID AND VAPOUR PHASES OF ONE COMPONENT THERMODYNAMIC SYSTEM IN ELECTRIC FIELD

FLORESCU IULIAN, FLORESCU DANIELA
THEORETICAL STUDY ABOUT THE SIMULTANEOUS IMPROVEMENT OF QUALITY AND PRODUCTIVITY IN LONGITUDINAL PAPER CUTTING - PART A

FLORESCU IULIAN, FLORESCU DANIELA
THEORETICAL STUDY ABOUT THE VARIABLES IN THE SCREENING AND FRACTIONATING PROCESSES

TOPLICEANU LILIANA, PALOSANU GABI
NUMERICAL METHOD OF CALCULUS OF THE PROPAGATION SPEED OF THE PRESSURE WAVE

UNGUREANU VIOREL, BRABIE GHEORGHE, JUDELE ADRIAN
THE LABORATORY EQUIPMENT FOR DEEP DRAWING OF CIRCULAR, RECTANGULAR AND L-SHAPED PARTS

UNGUREANU VIOREL, PANOSCHI CRISTIAN, VACHER PIERRE, AHMED HADDAD
NUMERICAL STRAIN MEASURING PROCEDURE TO DRAW THE FORMING LIMIT DIAGRAM AT NECKING FOR ALUMINUM SHEE

UNGUREANU VIOREL, PANOSCHI CRISTIAN
THE EXPERIMENTALLY DETERMINATED FORMING LIMIT DIAGRAM FOR ALUMINUM

PINTILIE GHEORGHE, ISAC SORIN
THE APPLICATION OF NONCUADRATIC HILL'S CRITERIA TO THE FORMING LIMIT STRESS DIAGRAMS USING FORMING LIMIT DIAGRAMS DETERMINATED EXPERIMENTALLY

PINTILIE GHEORGHE, ISAC SORIN
A MANUFACTURING PROCESS FOR THE INCREASE OF THE DEFORMATION CAPACITY OF THICKNESS SHEET-METAL

RAVEICA IONEL, NEDEFF VALENTIN, SCHNAKOVSZKY CAROL
DESCRIPTION OF THE CONTACT BETWEEN A DETERMINISTIC ANISOTROPIC TOOL SURFACE AND A WORKPIECE SUBJECTED TO PLASTIC DEFORMATION

RAVEICA IONEL, NEDEFF VALENTIN, SCHNAKOVSZKY CAROL
THEORETICAL AND EXPERIMENTAL RESULTS OF THE ELASTIC-PLASTIC RESPONSE OF A CIRCULAR ROD SUBJECTED TO NON-PROPORTIONAL COMBINED TORQUE AND TENSION LOADINGS

BRABIE GHEORGHE, CHIRIŢĂ BOGDAN
METHODS AND TEHNICAL SOLUTIONS APPLIED TO IMPROVE THE PROTECTION OF THE MACHINE-TOOL OPERATORS

GHENADI ADRIAN
METHODS FOR INCREASING THE PRECISION AT HIGH PRODUCTIVITY MACHINE TOOLS

BRABIE GHEORGHE
METHODS AND TECHNICAL SOLUTIONS APPLIED TO IMPROVE THE ECONOMICAL FEATURES OF UTILIZATION OF THE MACHINE-TOOLS

GHENADI ADRIAN
MODELING OF ELASTICIY MOUNTED VERTICAL SPINDLE

GHENADI ADRIAN
THE INFLUENCE OF THE TOOL CLAMPING MECHANISM TO THE PRECISION OF MACHINE TOOLS

CHIRIŢĂ BOGDAN
SOME ASPECTS CONCERNING THE UTILIZATION OF THE NONCONVENTIONAL MATERIALS FOR THE STRUCTURAL ELEMENTS OF THE MACHINE TOOLS

GEAMĂN VIRGIL, GEAMĂN LUCICA
COMPACTAREA LA RECE A PULBERILOR METALICE NANOGRANULARE

GEAMĂN LUCICA
NOI ASPECTE PRIVIND FINISAREA ELECTROEROZIVA A MATRITELOR

GEAMĂN LUCICA
NOI ASPECTE PRIVIND OBTENEREA PALETELOR PENTRU ROTORII TURBINELOR HIDRAULICE

Copyright (c) 1995-2007 University of Bacu