Quick search
Go!

USE OF NON-CONVENTIONAL TECHNOLOGIES FOR THE MANUFACTURING OF SOME WATER OXYGENATION DEVICES


MATEESCU GABRIELA, BÄ‚RAN NICOLAE, BESNEA DANIEL *
MECHANICAL ENGINEERING AND MECHATRONICS DEPARTMENT, "POLITEHNICA" UNIVERSITY OF BUCHAREST, ROMANIA

Issue:

JESR, Number 3, Volume XVI

Section:

Issue No. 3 - Volume 16 (2010)

Abstract:

The paper presents the manufacturing technology for a water oxygenation device called further fine bubbles generator. The fine bubbles generator has a rectangular shape and it can create a screen of fine air bubbles. The manufacturing technology of the drilled board (the board with holes) and the manufacturing technology of the fine bubbles generator’s body are subsequently exposed. A non-conventional technology, namely electro-erosion processing, was used in order to manufacture the board with holes. Fine air bubbles are obtained by this method, increasing the oxygen transfer to the water mass.

Keywords:

fine bubbles generator, water oxygenation, electro-erosion cutting.

Code [ID]:

JESR201016V16S01A0007 [0002993]

Full paper:

Download pdf


Copyright (c) 1995-2007 University of Bacău