Modelling And Optimization In The Machines Building Field

---

Volume III - MOCM - Volume III (2006)
Abstracts: 41 records

ROÅžCA VÂLCU
THE DETERMINATION OF THE OPERATION DURATION AT A FATIGUE SOLICITATION FOR OSCILLATOR EXTENSION AT THE 213K TEMPERATURE

ALBUÅ¢ AURELIAN
DEVELOPMENT OF A FORCE CONTROLLED MICROGRIPPER

ATANASIU COSTICÄ‚, SOROHAN ÅžTEFAN
NONLINEAR NUMERICAL AND EXPERIMENTAL ANALYSIS OF SHELLS LOADED WITH CONCENTRATED LOADS

BADEA MANUELA-CODRUÅ¢A, PÄ‚STRAV IOAN
STRESSES IN A SHAFT WITH TWO KEYSEATS

BEZNEA ELENA-FELICIA, CHIRICA IONEL, CHIRICÄ‚ RALUCA
TESTS ON THE NAVAL BRIDGE COMPOSITE MATERIALS

BOIERIU C., CURTU IOAN, LICA D.
MECHANICAL TESTING OF THE LIGNIN-CELLULOSE BASED PANELS

BOTEAN ADRIAN-IOAN
INTRODUCTION FOR A FINITE ELEMENTS ANALYSIS FOR A BURNING SPARKING ENGINE CYLINDER HEAD

CAPELLE J., PLUVINAGE G., LEBIENVENU M.
DETERMINATION OF FRACTURE LOAD BY ACOUSTIC EMISSION

CARLESCU PETRU, CATANA RAMONA, IURAS EMILIA, BÂRSÄ‚NESCU PAUL-DORU
DESIGN OF THE SPRING ELEMENT FOR A NEW WIM SENSOR, USING STRAIN GAGES

CHIRICA IONEL, BEZNEA ELENA-FELICIA, CHIRICÄ‚ RALUCA
NUMERICAL TESTS ON THE BUCKLING OF THE PLATES MADE OF COMPOSITE MATERIALS

CIOFOAIA VASILE, BEJINARU-MIHOC GHEORGHE
THE DESIGN AND MANUFACTURING OF THE DYNAMOMETER FOR MEASURING CUTTING FORCES

CIOFOAIA VASILE, ILIESCU NICOLAE, CURTU IOAN, SECHE ION, PODOREANU AUREL, DOGARU FLORIN
ASPECTS REGARDING THE BEHAVIOR OF THE SEAT BELT SIMPLE GUIDE SUBJECTED TO TRACTION

DINU GABRIELA, ATANASIU COSTICÄ‚, SOROHAN ÅžTEFAN
STRUCTURE ANALYSIS OF THE FLANGING PRESS FRAME TYPE PIT 120 BY THE METHOD OF FINITE ELEMENTS

DUMITRU ION, FAUR NICOLAE
CHARACTERISTICS REGARDING THE DURABILITY ASSESSMENT AT IMPACT FATIGUE TESTS (The First Part)

DUMITRU ION, FAUR NICOLAE
CHARACTERISTICS REGARDING THE DURABILITY ASSESSMENT AT IMPACT FATIGUE TESTS (The Second Part)

FAUR NICOLAE, DUMITRU ION, MARSAVINA LIVIU
RESEARCHES REGARDING THE BEHAVIOUR UNDER COMPRESSION OF THE BOXES MADE OF A SINGLE CORRUGATED BOARD

FLORESCU DANIELA
SOLUTIONS FOR THE PROBLEM OF THE SEMI-INFINITE BODY

FLORESCU DANIELA, FLORESCU IULIAN
THEORETICAL STUDY ABOUT THE DETERMINATION OF THE LOCAL TURBULENT FRICTION FACTOR AND HEAT TRANSFER COEFFICIENT

GHEORGHIAN MIRELA, CIUCESCU DORU
THE QUANTITATIVE ANALYSE OF CARBIDES PHASES IN THE CRYOGENIC AND ULTRASONIC TREATED BEARINGS STEELS

GHEORGHIAN MIRELA, CIUCESCU DORU
EXPERIMENTAL RESEARCHES ON RUNNING PROPERTIES OF NON-CONVENTIONAL TREATED STEELS FOR BEARINGS

GOIA IOAN, ROÅžU DORIN, HORAÅ¢IU TEODORESCU
STATIC TESTS REGARDING AN ADVANCED SANDWICH COMPOSITE STRUCTURE

ILIESCU NICOLAE, NÄ‚STÄ‚SESCU VASILE
EVALUATION OF BIOMECHANICAL PERFORMANCES OF SOME OSTEOSYNTHESIS TECHNIQUES APPLIED IN THE TREATMENT OF FEMORAL FRACTURES

ILIESCU NICOLAE, PASTRAMÄ‚ ÅžTEFAN DAN
EVALUATION OF THE MECHANICAL FACTORS INFLUENCE IN THE TREATMENT OF TIBIAL FRACTURES, USING THE KUNTSCHER CENTRO-MEDULLAR NAIL TECHNIQUE

MÄ‚NESCU TIBERIU ÅžTEFAN, COPACI ION, OLARU STELIAN, CREANGÄ‚ FLORENTIN
THE ISOLATION OF SHOCK BY EQUIPING THE RAILWAY VEHICLES WITH LONG-RUN BUFFERS

MOCANU FLORENTINA, BÂRSÄ‚NESCU PAUL-DORU
SYNTHESIS OF THE RESULTS REGARDING THE BREAKING RESISTANCE OBTAINED BY STATIC LOADS AND THE IMPACT BEHAVIOR OF THE ADHESIVE JOINTS

MODIGA M., MURINEANU A., DIMACHE A.
STRESS REDUCING IN PIPE LINE ELEMENTS, BASED ON FEM COMPLEX MODELING

MURINEANU A., ANGHEL L., MODIGA M.
OPTIMIZATION OF PIPE LINE ELASTICITY IN OIL CARRIER

MUSAT SORIN DUMITRU, CHIRICÄ‚ RALUCA
A NEW MODEL OF MACRO-ELEMENT USED FOR SHIP HULL TORSION

PAREPA SIMION
STAND FOR THE STUDY OF THE NON-STATIONARY HYDROMECHANICAL PROCESSES IN THE FRAME OF THE ELECTRO-HYDROSTATIC DRIVING GROUP FROM LARGE DIAMETER DRILLING RIGS

PASCU ADRIAN, GALAFTION SOFONEA
THE DETERMINATION BY EXPERIMENTAL AND NUMERICAL METHODS OF STRESS AND STRAIN STATES IN PERFORATED PLATES WITH SQAURE HOLES POSITIONED IN PARALLEL PATTERN, STRESSED WITH SINGLE AXIS TENSILE STRESS

PINTILIE GHEORGHE, ALBUÅ¢ AURELIAN, ZICHIL VALENTIN
CONSIDERATIONS CONCERNING USE OF IMAGE ANALYSIS METHOD FOR STUDY OF THE DEFORMATION DISTRIBUTION

POPOI ARDELEAN ADRIAN NICOLAE, CURTU IOAN, CIOFOAIA VASILE
BEHAVIOR OF WOOD-CONCRETE COMPOSITE BEAMS CONTINUOUS WOOD-CONCRETE-COMPOSITE SYSTEM

RADOIUA BOGDAN, GARABET KÃœMBETLIANB, PERIDEA NICULAE
EXPERIMENTAL STUDY OF SHELL AND TUBE HEAT EXCHANGER'S BEHAVIOUR

RADU GHEORGHE, COMÄ‚NESCU IOANA
LARGE DEFORMATIONS AT THIN PLANE DISKS BENDING UNDER UNIFORM DISTRIBUTED LOADS, CONSIDERING THE MEMBRANE STRESSES PART I - GENERAL THEORETICAL CONSIDERATIONS ON LARGE DEFORMATIONS

RADU GHEORGHE, COMÄ‚NESCU IOANA
LARGE DEFORMATIONS AT THIN PLANE CIRCULAR PLATES BENDING UNDER CONSTANT LOADING, TAKING INTO ACCOUNT THE MEMBRANE STRESSES PART II - BENDING UNDER INITIAL LOADING OF THE PLATES MEAN PLANE

RIZEA NICOLETA, POSEA NICOLAE
TESTS RESULTS FOR 16Mo5.3b STEEL SUBMITTED TO THERMOMECHANICAL FATIGUE AND THEIR STATISTICAL ANALYSIS

RIZEA NICOLETA, POSEA NICOLAE
MICROSTRUCTURAL RESEARCHES REGARDING THE CRACKING OF 16Mo5.3b STEEL TEST SPECIMENS SUBMITTED TO THERMOMECHANICAL FATIGUE TESTS

ROÅžCA VÂLCU
THE STRESS FIELD AT THE TOP OF AN OPENED CRACK IN SAMPLES FROM 10TiNiCr175 SUBMITTED TO AN OSCILLATOR EXTENSION WITH THE ASYMMETRY COEFFICIENT R=0.1

ROÅžCA VÂLCU
THE DETERMINATION OF THE OPERATION DURATION AT A FATIGUE SOLICITATION FOR OSCILLATOR EXTENSION AT THE 213 K TEMPERATURE

SANDU ADRIANA, SANDU MARIN, SOROHAN ÅžTEFAN
A COMPARATIVE ANALYTIC-NUMERIC-EXPERIMENTAL STUDY ON SYMMETRICAL AND ASYMMETRICAL ADHESIVE LAP JOINTS

STANCIU LAVINIA SILVIA, POPA IOAN
THE BEHAVIOUR OF DRILL PIPES WITH SURFACE DEFECTS IN THE CASE OF DIRECTIONAL DRILLING