Quick search
Go!

Modelling And Optimization In The Machines Building Field


Issue: MOCM - Number 13, Volume IV (2007)

MOCM - Issue No. 13 - Volume IV (2007)
Abstracts: 48 records

AKOURRI O., ELAYACHI I., PLUVINAGE G.
STRESS TRIAXIALITY AS FRACTURE TOUGHNESS TRANSFERABILITY PARAMETER FOR NOTCHED SPECIMENS

ALBUÅ¢ AURELIAN
THE INFLUENCE OF THE SHEET THICKNESS ON SPRINGBACK PHENOMENON IN CASE OF A PART MADE FROM TAILOR WELDED STRIPES

ALBUÅ¢ AURELIAN
WORKABILITY OF TAILOR WELDED BLANKS

ION ANGHEL, IONEL-ALIN MOCIOI, ALECSANDRU PAVEL
THE NUMERICAL CALCULUS OF THE FIRE RESISTANCE OF THE STEEL CROSS-BEAMS

AXINTE C., KOLIOPOULOS T. C.
QUANTIFICATION OF SPRINGBACK AND ITS REDUCTION BY APPLING AN OPTIMIZATION PROCEDURE

BABEU TIBERIU DIMITRIE, PETCOVICIU OANA
FRACTAL DIMENSION AND FRACTURE ROUGH

BACILA A., MESMACQUE G., ÅžERBAN V. A., VODA M.
EFFECT OF UNDERLOAD APPLIED AFTER AN OVERLOAD ON FATIGUE CRACK PROPAGATION FOR 12NC6 STEEL

SEPTIMIU COJOCARU, FAKO RALUCA, IRIMIA IOAN
EMPHASYSE OF SOME PECULIAR ASPECTS OF A PIPELINE CORROSION DAMGE DUE TO CITADINES WORK CONDITIONS

DAN MIHAI CONSTANTINESCU, DRAGOS APOSTOL, MATEI MIRON
FAILURE OF SANDWICH COMPOSITE FOAMS AND MICROSTRUCTURAL ANALYSES OF THEIR BEHAVIOUR

CRISTEA ION, AXINTE CRINA
INFLUENCE OF FRICTION ON THE QUALITY OF INNER THREADS MADE BY PLASTIC DEFORMATION

DRAGOI D. D, DRAGOI A.
THE PLASTIC DEFORMATION IN THE MECHANICAL ALLOYING OF THE AMORPHOUS ALLOYS

ION DUMITRU, SECHEI RAMONA, MIHAI HLUSCU
ABOUT SOME DYNAMIC FRACTURE PARTICULARITIES OF ELEMENTS WITH CRACKS

GHELASE DANIELA, DOGARIU CONSTANTIN, DASCHIEVICI LUIZA
CONTINUOUS IMPROVEMENT OF QUALITY

GHELASE DANIELA, DASCHIEVICI LUIZA, DIACONESCU IOANA
SEVEN MANAGEMENT AND PLANNING TOOLS

GOANTA VIOREL
FINITE ELEMENTS ANALYSIS AND CRACKING CALCULATION FOR PINION- RACK MECHANISM REGARDING THE DIRECTION MECHANISM

GOANTA VIOREL
THE INFLUENCE OF THE DISPERSION OF PARTICLES IN THE VICINITY OF A CRACK

HRENIUCANDV., MODIGA, M., DIMACHE, A.
UNIFORM PRESSURE LOADED SUPER FERRO CEMENT MADE PLATES BENDING ASSESSEMENT

RADU I. IATAN, CARMEN T. POPA
ANNULAR PLATE WITH SIMPLE LEANED CONTOURS, UNDER THE ACTION OF AN UNIFORM DISTRIBUTED PRESSURE

RADU I. IATAN, CARMEN T. POPA
SOLICITATION STATES IN THE ANNULAR AND SIMPLE LEANED PLATES ON THEIR CONTOURS, UNDER THE ACTION OF SOME RADIAL BENDING MOMENTS (I)

RADU I. IATAN, CARMEN T. POPA
STRESSES STATES IN RIBBED AND CIRCULAR PLATES

ILIESCU N., ATANASIU C., PASTRAMÄ‚ Åž. D., BACIU FL.
NUMERICAL AND EXPERIMENTAL STUDY OF THE STRESS STATE AND THE POSSIBILITY OF CRACK INITIATION IN A FASTENING ELEMENT OF A HYDROAGGREGATE

BOGDAN LEIÅ¢OIU, MARIAN MAREÅž
SOME ISSUES ON THE SHEAR MODULUS DETERMINATION BY USING THE 10° OFF-AXIS TENSILE TEST

MARIAN MAREÅž, BOGDAN LEIÅ¢OIU
ON THE USE OF IOSIPESCU SHEAR TEST FOR CHARACTERIZING SOME COMPOSITE MATERIALS

MIRCEA MODIGA, ALINA DIMACHE, HRENIUC VICTOR, ANDREAS IOANOU
CORROSION AND SHIP HULL ULTIMATE STRENGTH

MIRCEA MODIGA, LEONARD DOMNISORU, ALINA DIMACHE
LIMIT MOMENTS UNDER COROSSION AT BULK-CARRIERS

MOREIRA P. M. G. P., PASTRAMÄ‚ Åž. D., P. M. S. T. DE CASTRO
THREE DIMENSIONAL STRESS FIELD AND STRESS INTENSITY FACTOR CALIBRATION FOR A CENTRAL CRACKED PLATE

ION NAE, MARIUS GABRIEL PETRESCU
ASPECTS CONCERNING THE OPTIMIZATION OF THE TECHNOLOGICAL PROCESSES

NEACÅžA A., STOICA D. B.
ASPECTS CONCERNING THE SOFTWARE APPLICATIONS IN ORDER TO DETERMINE THE ECHNOLOGICAL SYSTEMS RELIABILITY

PASCU ADRIAN, GALAFTION SOFONEA, MARCU FRÄ‚Å¢ILÄ‚
USING THE FINITE ELEMENT METHOD FOR CONSTRUCTIVE OPTIMIZATION OF THE ELASTIC ELEMENT COMPRISED IN A MECHANIC DYNAMOMETER

ALECSANDRU PAVEL, TOADER GAUREANU
THE BASE PHILOSOPHY OF AN AVAILABLE WORKING SERVICE REGARDING THE PETROCHEMICAL TECHNOLOGICAL EQUIPMENTS

PETRE IVONA, TACHE CARMEN
CALCULATION PRINCIPLES REGARDING THE WEAR OF SHAFT-SLIDING BEARING COUPLING

GHEORGHE PINTILIE, ALBUÅ¢ AURELIAN, ZICHIL VALENTIN
THE INFLUENCE OF THE ASYMMETRY COEFFICIENT WITH NEGATIVE VALUES (R<0) ON THE FATIGUE CRACK GROWTH RATE

GHEORGHE N. RADU, IOANA SONIA COMÄ‚NESCU
BEM – BOUNDARY ELEMENTS METHOD USED AT THE STUDY OF STRESS CONCENTRATORS (CUTS-OFF) AT ROTATIONAL DISKS IN AXIAL-SYMMETRIC THERMAL REGIME PART I: BEM – THEORETICAL CONSIDERATIONS

GHEORGHE N. RADU, IOANA SONIA COMÄ‚NESCU
BEM – BOUNDARY ELEMENTS METHOD USED AT THE STUDY OF STRESS CONCENTRATORS (CUTS-OFF) AT ROTATIONAL DISKS IN AXIAL-SYMMETRIC THERMAL REGIME PART II – THE INFLUENCE REVOLUTION-TEMPERATURE AND EXPERIMENTAL RESULTS

GHEORGHE N. RADU, IOANA SONIA COMÄ‚NESCU
BEM – BOUNDARY ELEMENTS METHOD USED AT THE STUDY OF STRESS CONCENTRATORS (CUTS-OFF) AT ROTATIONAL DISKS IN AXIAL-SYMMETRIC THERMAL REGIME PART III – EIGEN VALUES PROBLEMS AT DISKS

ROSU DORIN, GOIA IOAN, VLASE SORIN, TEODORESCU HORATIU
SOME FAILURE MODES OF POLYLITE 440-M888 POLYESTER RESIN REINFORCED WITH RT300 ROVING FABRIC SUBJECTED TO TENSILE LOADINGS

ROTARU ANA
OPTIMIZATION OF PRODUCTION PROCESSES WITH THE HELP OF KANBAN METHOD

ROTARU ANA
VALUE STREAM MAP INSTRUMENT OF LEAN MANUFACTURING SYSTEM

SÂRBU IONEL, PRUTEANU OCTAVIAN, PARASCHIV DRAGOS, CARAUSU CONSTANTIN
THE INFLUENCE OF THE TECHNOLOGICAL ELEMENTS ON THE ROUGHNESS OF THE SURFACES PROCESSED THROUGH PLASTIC COLD FORMING

GABRIELA SÄ‚VUC, DANIELA FLORESCU, FLORESCU IULIAN, MIHAI STANCU
THE RTR ROBOT PATH OF MOTION, WHEN THE TRANSLATION COUPLING LAW IS SINUSOIDAL

ULERIU DORINEL
ASPECTS REGARDING THE EVALUATION OF THE UNCERTAINTY IN THE DETERMINATION OF THE RESIDUAL STRESS THROUGH THE HOLE DRILLING METHOD

ULERIU DORINEL
MANAGEMENT OF REMANENT TENSIONS: ASPECTS ON CALCULATIONS OF LAYERS RESISTANCE AND RIGIDITY, TAKING INTO ACCOUNT THE REMANENT TENSIONS; MEASUREMENT TECHNIQUES

ULMANU VLAD, MIHAELA CÄ‚LÅ¢ARU, MARIUS BÄ‚DICIOIU, GH. ZECHERU, GH. DRÄ‚GHICI
SUCKER ROD FATIGUE BEHAVIOR ANALYSIS

UNGUREANU VIOREL
THE LINEAR AND ANGULAR LOGARITHMIC STRAIN AND THEIR UTILIZATION IN THE CONTINUUM MEDIA PROBLEMS

VÂLCU ROÅžCA, PROCA VICTOR, MIRELA GHIORGHIAN
THE ANALYSIS OF THE DURABILITY WITH THE VARIATION OF THE TEMPERATURE TO AN ECCENTRIC AXIAL SOLICITATION FOR R=0.5 IN THE STEEL 10 TiNiCr 175

VÂLCU ROÅžCA, MIRELA GHIORGHIAN
VARIANTS OF ANALYSIS OF THE PROPAGATION RATE OF THE CRACK TO THE AXIAL CYCLIC SOLICITATION FOR THE VARIATION OF THE WORK TEMPERATURE

GH. ZECHERU, GH. DUMITRU, GH. DRAGHICI, DAN CHEÅ¢AN, ALIN DINIŢĂ, LAÅ¢A ILIE
THE SPECIAL FEATURES OF USING FRACTURE ARRESTORS IN NATURAL GAS TRANSMISSION PIPELINES

GH. ZECHERU, GH. DUMITRU, GH. DRÄ‚GHICI, ALIN DINIŢĂ, LAÅ¢A ILIE
INFLUENCE OF COMPOSITE WRAP REPAIRS ON THE STRUCTURAL INTEGRITY OF PIPELINES

Copyright (c) 1995-2007 University of Bacãu