INFLUENCE OF KAOLIN-BASED FILLERS ON MECHANICAL BEHAVIOUR OF AN EPOXY RESIN

  • BUNCIANU DOREL
    UPT Timisoara - Département Génie Mécanique et Industrielle, Bd. Mihai Viteazu 300222, Timisoara, Romania, IUT du Limousin – Département Génie Mécanique et Productique, allée André Maurois 87065 Limoges cedex, France
  • TESSIER-DOYEN NICOLAS
    IUT du Limousin – Département Génie Mécanique et Productique, allée André Maurois 87065 Limoges cedex, France, Laboratoire SPCTS, Centre Européen de la Céramique - 12 Rue Atlantis 87068 Limoges cedex, France
  • COURREGES FABIEN
    IUT du Limousin – Département Génie Mécanique et Productique, allée André Maurois 87065 Limoges cedex, France
  • ABSI JOSEPH
    IUT du Limousin – Département Génie Mécanique et Productique, allée André Maurois 87065 Limoges cedex, France
  • SMITH AGNES
    Laboratoire SPCTS, Centre Européen de la Céramique - 12 Rue Atlantis 87068 Limoges cedex, France
  • LAOUCHEDI DALILA
    Unité de Recherche Matériaux, Procédés et Environnement, Université M'Hamed Bougara, avenue de l'indépendance, 35000 Boumerdes, Algérie
  • BOUDJEMA BEZZAZI
    Unité de Recherche Matériaux, Procédés et Environnement, Université M'Hamed Bougara, avenue de l'indépendance, 35000 Boumerdes, Algérie

Abstract

This work has consisted in studying the effect of the particle size distribution and the added quantity of a kaolin on the tensile mechanical behavior of an epoxy resin. The obtained results have allowed to highlight that a fine particle size distribution of kaolin incorporated in a small proportion (10%) is favorable both to a high stress to rupture and an improved Young’s modulus. When the amount is 20%, the mechanical performance is affected because of the presence of interfacial decohesions (defects) between the larger agglomerates and the matrix.

Cuvinte cheie

epoxy resin kaolin mechanical behaviour strengthening