Modelling And Optimization In The Machines Building Field
Issue: MOCM - Number 5 (1999) MOCM - Issue No. 5 (1999)
Abstracts: 42 records
SAVULYAK V. I., ZHUKOV A. A.
FORMATION OF CARBON (CYANOPOLYNE) AND OF DIAMOND IN Fe-C ALLOYS
ZHUKOV A. A., SAVULYAK V. I.
THE STRUCTURE OF THE CEMENTITE PHASE IN THE CONSTRUCTIONAL ALLOYS ON THE Fe-C BASE
FORIS ANCA
EXPERIMENTAL RESEARCH FOR THE INVESTIGATION OF THE ACOUSTIC PROPERTIES OF SOUND-ABSORBANT MATERIALS
FORIS ANCA
EXPERIMENTAL DETERMINATION OF THE ACOUSTIC PROPRIETIES FOR THE "SANDWICH" STRUCTURE CONSISTING OF TEXTILE OFFAL COVERED WITH BITUMEN AND PVC
FORIS ANCA
THEORETICAL INVESTIGATION PRINCIPLES OF SOME ACOUSTIC PROPERTIES OF SOUND-ABSORBENT MATERIALS OF ROMANIAN MANUFACTURE
STAN GHEORGHE
FACTORS INFLUENCING THE POLYMER FRAGILE - DUCTILE BEHAVIOUR
RAVEICA IONEL
POLLUTION PREVENTION IN PROCESS DEVELOPMENT AND DESIGN
MÄ‚CÄ‚RESCU BOGDAN
CURRENT PROBLEMS REGARDING ENVIRONMENTAL PROTECTION IN THE PRODUCTION UNITS WITHIN THE MACHINES ENGINNERING
POPOVICI IRINA, POPOVICI RADU
CONCERNING ABOUT ENVIRONMENTAL PROTECTIONS
NEDEFF VALENTIN, MOÅžNEGUÅ¢U EMILIAN
THERMIC BALANCE SHEET REAL SIMPLE AT DRIER FOR CEREALS
MOÅžNEGUÅ¢U EMILIAN, NEDEFF VALENTIN
HUMIDITY INFLUENCE OF PARTICLES ON THERE SORT AFTER AERODYNAMICS PROPERTY
NEDEFF VALENTIN, MOÅžNEGUÅ¢U EMILIAN
ASPECTS WITH ACTIVE LOOK AERATION AND DRYING CEREALS AND LEGUMINOUS PLANTS FOR GRAIN
RUSU PETRICÄ‚, RAÅ¢I IOAN, NECULAIASA VASILE
NECESSARY OF COLD CALCULUS FOR COLD DEPOT DESTINE APPEAL KEEPING
RUSU PETRICÄ‚, RAÅ¢I IOAN, MOÅžNEGUÅ¢U EMILIAN
THEORETIC CONSIDERATION SIGHT FRUITS AND VEGETABLES PRESSURE IN SEEING NATURAL JUICE OBTAINES
RUSU PETRICÄ‚, RAÅ¢I IOAN, MOÅžNEGUÅ¢U EMILIAN
DENSE FRUIT JUICES OBTAIN FROM BOX THORN FRUIT ON BREAK UP AND STRAIN MACHINE-TYPE PRESSING AND STRAIN DRUM
MÄ‚CÄ‚RESCU BOGDAN
SUSTAINABLE DEVELOPMENT OF FOOD INDUSTRY IN CORRELATION WITH THE ENVIRONMENTAL PROTECTION
BIBIRE LUMINIÅ¢A, MARIN MARIUS, MARIN CORINA
THE POWER REQUIREMENTS OF THE AGITATOR
MARIN MARCUS, BIBIRE LUMINIÅ¢A, MARIN CORINA
THEORETICAL RESEARCH CONCERNING ON DIMENSIONAL ANALYSIS FOR FLUID AGITATION SYSTEM
BIBIRE LUMINIÅ¢A, GURAMBA GHEORGHE
BEHAVIOR OF FLUID VELOCITY IN AGITATED VESSEL
GURAMBA GHEORGHE, BIBIRE LUMINIÅ¢A
BLENDING AND BLEND TIME
FLORESCU IULIAN, CÄ‚LIMAN RADU
A NUMERICAL STUDY OF UNSTEADY LAMINAR FORCED CONVECTION FROM A CIRCULAR CYLINDER
FLORESCU IULIAN, CÄ‚LIMAN RADU
UNSTEADY MIXED CONVECTION HEAT TRANSFER FROM A HORIZONTAL CIRCULAR CYLINDER
SAJIN TUDOR
THE DISPLACEMENT OF THE EQUILIBRIUM STATE BETWEEN LIQUID AND VAPOUR PHASES OF ONE COMPONENT THERMODYNAMIC SYSTEM IN ELECTRIC FIELD
FLORESCU IULIAN, FLORESCU DANIELA
THEORETICAL STUDY ABOUT THE SIMULTANEOUS IMPROVEMENT OF QUALITY AND PRODUCTIVITY IN LONGITUDINAL PAPER CUTTING - PART A
FLORESCU IULIAN, FLORESCU DANIELA
THEORETICAL STUDY ABOUT THE VARIABLES IN THE SCREENING AND FRACTIONATING PROCESSES
TOPLICEANU LILIANA, PALOSANU GABI
NUMERICAL METHOD OF CALCULUS OF THE PROPAGATION SPEED OF THE PRESSURE WAVE
UNGUREANU VIOREL, BRABIE GHEORGHE, JUDELE ADRIAN
THE LABORATORY EQUIPMENT FOR DEEP DRAWING OF CIRCULAR, RECTANGULAR AND L-SHAPED PARTS
UNGUREANU VIOREL, PANOSCHI CRISTIAN, VACHER PIERRE, AHMED HADDAD
NUMERICAL STRAIN MEASURING PROCEDURE TO DRAW THE FORMING LIMIT DIAGRAM AT NECKING FOR ALUMINUM SHEE
UNGUREANU VIOREL, PANOSCHI CRISTIAN
THE EXPERIMENTALLY DETERMINATED FORMING LIMIT DIAGRAM FOR ALUMINUM
PINTILIE GHEORGHE, ISAC SORIN
THE APPLICATION OF NONCUADRATIC HILL'S CRITERIA TO THE FORMING LIMIT STRESS DIAGRAMS USING FORMING LIMIT DIAGRAMS DETERMINATED EXPERIMENTALLY
PINTILIE GHEORGHE, ISAC SORIN
A MANUFACTURING PROCESS FOR THE INCREASE OF THE DEFORMATION CAPACITY OF THICKNESS SHEET-METAL
RAVEICA IONEL, SCHNAKOVSZKY CAROL
DESCRIPTION OF THE CONTACT BETWEEN A DETERMINISTIC ANISOTROPIC TOOL SURFACE AND A WORKPIECE SUBJECTED TO PLASTIC DEFORMATION
RAVEICA IONEL, SCHNAKOVSZKY CAROL
THEORETICAL AND EXPERIMENTAL RESULTS OF THE ELASTIC-PLASTIC RESPONSE OF A CIRCULAR ROD SUBJECTED TO NON-PROPORTIONAL COMBINED TORQUE AND TENSION LOADINGS
BRABIE GHEORGHE, CHIRIŢĂ BOGDAN
METHODS AND TEHNICAL SOLUTIONS APPLIED TO IMPROVE THE PROTECTION OF THE MACHINE-TOOL OPERATORS
GHENADI ADRIAN
METHODS FOR INCREASING THE PRECISION AT HIGH PRODUCTIVITY MACHINE TOOLS
BRABIE GHEORGHE
METHODS AND TECHNICAL SOLUTIONS APPLIED TO IMPROVE THE ECONOMICAL FEATURES OF UTILIZATION OF THE MACHINE-TOOLS
GHENADI ADRIAN
MODELING OF ELASTICIY MOUNTED VERTICAL SPINDLE
GHENADI ADRIAN
THE INFLUENCE OF THE TOOL CLAMPING MECHANISM TO THE PRECISION OF MACHINE TOOLS
CHIRIŢĂ BOGDAN
SOME ASPECTS CONCERNING THE UTILIZATION OF THE NONCONVENTIONAL MATERIALS FOR THE STRUCTURAL ELEMENTS OF THE MACHINE TOOLS
GEAMÄ‚N VIRGIL, GEAMÄ‚N LUCICA
COMPACTAREA LA RECE A PULBERILOR METALICE NANOGRANULARE
GEAMÄ‚N LUCICA
NOI ASPECTE PRIVIND FINISAREA ELECTROEROZIVA A MATRITELOR
GEAMÄ‚N LUCICA
NOI ASPECTE PRIVIND OBTENEREA PALETELOR PENTRU ROTORII TURBINELOR HIDRAULICE
