Modelling And Optimization In The Machines Building Field
Issue: MOCM - Number 11, Volume I (2005) Section I - Methods And Techniques In Strain And Stress Research
Abstracts: 35 records
From an administrative mistake, in this volume, four articles which have not passed through all the selection procedures stipulated by the Editorial Committee were published. These articles were removed from the electronic format of the journal and in MOCM – 15 (2009) no. I an erratum will be posted in printed version of the journal.
ALBUÅ¢ AURELIAN
SIMULATION AND EXPERIMENTAL INVESTIGATION OF THE BLANKHOLDER FORCE INFLUENCE ON SPRING BACKEFFECT FOR TAILOR WELDED BLANKS
ALBUÅ¢ AURELIAN
INVESTIGATION BY SIMULATION OF THE BLANKHOLDER INFLUENCE ON SPRINGBACK EFFECT OF A RECTANGULAR PART MANUFACTURED BY TAILOR WELDED STRIPES
ATANASIU VIRGIL
COMPUTER ANALYSIS OF DYNAMIC RESPONSE OF GEAR TRANSMISSIONS WITH BACKLASH CONSIDERATION
AXINTE CRINA
EFFECT OF FRICTION CONDITIONS ON THE SPRINGBACK PARAMETERSOF THE CYLINDRICAL DRAWPARTS
AXINTE CRINA
EXPERIMENTAL ANALYSIS OF THE SPRINGBACK PARAMETERS OF THECYLINDRICAL DRAWN PARTS
BÄ‚ICUÅžI ADRIAN, TANZEGLOCKE DIRK, FLANDORFER WOLFGANG
THE NEW SIEMENS COLLABORATIONS IN ROMANIA
BARAN N., DONTU O., BESNEA D., DUMINICA D., MENGHER R.
MANUFACTURING TECHNOLOGY FOR A NEW TYPE OF PROFILEDROTOR
BÎTCĂ CONSTANTIN, BÂRSĂNESCU PAUL-DORU, MIHĂLCUŢ MIHAI
Considerations on the methods using to measure the mechanical properties of the human bones
BRABIE GHEORGHE, SCHNAKOVSZKY CAROL, CHIRIŢĂ BOGDAN, CHIRILĂ CIPRIAN, AXINTE CRINA
Application of the Taguchi method for the compensation of errors determined by springback in the case of a conical lied made from metal sheets
BRABIE GHEORGHE, SCHNAKOVSZKY CAROL, AXINTE CRINA, CHIRILĂ CIPRIAN, CHIRIŢĂ BOGDAN
Application of the Taguchi method for the compensation of errors determined by springback in the case of a draw half-rim with stiffness channels made from metal sheets
CHIRILÄ‚ CIPRIAN, GHERGHEL MIHAI
MATHEMATICAL MODELING OF TOOL WEARING IN CASE OF FRONTALMILLING
CHIRIŢĂ BOGDAN
ANALYSIS OF STRESS – STRAIN STATE IN U BENDING OF SHEET METALSUSING FINITE ELEMENT METHOD
CHIRIŢĂ BOGDAN
REDUCTION OF SPRINGBACK PHENOMENON IN U BENDING OF SHEETMETAL USING DESIGN EXPERIMENT
CRISTEA ION, DRAGOI DAN
THE STATIC CAPACITY OF THE INNEAR THREADS EXECUTEDBY PLASTIC DEFORMATION
CRISTEA ION, DRAGOI DAN
ELASTO-PLASTIC DEFORMATION FOR INNERTHREADS EXECUTED BY PLASTIC DEFORMATION
DOROFTEI MIHAI, MOLCUTI NICOLAE
SIEMENS ROMANIA – AUTOMATION AND DRIVE
GHERGHEL MIHAI, CHIRIŢĂ BOGDAN
EXPERIMENTAL RESEARCHES CONCERNING THE INFLUENCE OF THEEDGE RADIUS R AND PITCH FEED SD ON THE ROUGHNESS OF THESURFACES MECHINED BY FINISHING MILLING OF CAST IRON
GHERGHEL MIHAI, CHIRILÄ‚ CIPRIAN
EXPERIMENTAL RESEARCHES CONCERNING THE INFLUENCE OFCUTTING EDGE RADIUS R AND FEED SD ON WEARING AND DURABILITYOF A CARBIDE TOOL IN CASE OF FINISHING MILLING FOR SILVERY PIGIRON
HAAS BERHNARD, DOROFTEI MIHAI
SIEMENS – 100 YEARS IN ROMANIA
ILIESCU NICOLAE, ATANASIU COSTICÄ‚, NÄ‚STÄ‚SESCU VASILE
COMBINED RESEARCHES ON THE SAFETY EVALUATION OF A PRESSED JOINT
JALLOUF S., CARMASOL A., SCHMITT C., PLUVINAGE G.
DETERMINATION OF SAFETY AND SECURITY FACTOR OF A GAS PIPE EXHIBITING A CORROSION DEFECT BY USING SINTAP PROCEDURE COUPLING WITH PROBABILISTIC METHOD (PART I)
JALLOUF S., CARMASOL A., SCHMITT C., PLUVINAGE G.
DETERMINATION OF SAFETY AND SECURITY FACTOR OF A GAS PIPE EXHIBITING A CORROSION DEFECT BY USING SINTAP PROCEDURE COUPLING WITH PROBABILISTIC METHOD (PART II)
JUDELE ADRIAN
ADVANTAGES AND DISADVANTAGES OF YIELD CRITERIA FORANISOTROPIC MATERIALS - SINTESIS
NÄ‚STÄ‚SESCU VASILE, PINTILIE GHEORGHE, ZICHIL VALENTIN
F.E.M. ANALYSIS OF IMPACT PROBLEMS
NÄ‚STÄ‚SESCU VASILE, ZICHIL VALENTIN, PINTILIE GHEORGHE
CONSIDERATIONS ABOUT COWPER-SYMONDS COEFFICIENTS
PÄ‚UNESCU MIHAELA
THE LIFETIME OF MECHANICAL STRUCTURESUNDER FATIGUE CONDITIONS
PERNEVAN IOAN, PERNEVAN MARIA
THEORETICAL ANALYSIS OF A CIRCULAR THIN PLATE UNDER PRESSURECLAMPED TO RIM IN THE PLASTIC RANGE DEFORMATION
PINTILIE GHEORGHE, ZICHIL VALENTIN, ALBUÅ¢ AURELIAN
LIFE TIME ESTIMATION OF A BUTTERFLY LAPPET VALVE
SCHNAKOVSZKY CAROL, BRABIE GHEORGHE, CHIRILĂ CIPRIAN, CHIRIŢĂ BOGDAN, AXINTE CRINA
EXPERIMENTAL AND SIMULATION ANALYSIS OF SPRING BACK IN THECASE OF A CONICAL DRAW LIED MADE USING TOOLS CORRECTED BYAPPLYING THE TAGUCHI METHOD OF OPTIMIZATION
SCHNAKOVSZKY CAROL, BRABIE GHEORGHE, CHIRIŢĂ BOGDAN, CHIRILĂ CIPRIAN, AXINTE CRINA
EXPERIMENTAL AND SIMULATION ANALYSIS OF SPRINGBACK IN THECASE OF A DRAWN HALF-RIM MADE USING TOOLS CORRECTED BYAPPLYING THE TAGUCHI METHOD OF OPTIMIZATION
UNGUREANU VIOREL, JUDELE ADRIAN
THE ENHANCED SPECIMEN AND TESTING DEVICE FOR PLANAR SHARESTRAIN TEST OF SHEET METAL
UNGUREANU VIOREL
THE TENSOR OF LOGARITHMIC AND CONVENTIONAL STRAINS
UNGUREANU MIORIÅ¢A
THE STUDY OF COMPRESSIVE STRESS AND DEFORMATION FOR THE ELEMENTS OF FRICTION COUPLE FOR THE BRAKES WITH AXIAL MOVEMENT
ZICHIL VALENTIN, NASTASESCU VASILE, PINTILIE GHEORGHE, SAVIN CARMEN, JUDELE ADRIAN, ALBUÅ¢ AURELIAN
F.E.M. ANALYSIS OF STRESS AND STRAIN STATE AT THE EXTERNAL LINKPLATE OF THE CAMSHAFTCHAIN OF A D.I. DIESEL ENGINE
ZICHIL VALENTIN, NASTASESCU VASILE, PINTILIE GHEORGHE, SAVIN CARMEN, JUDELE ADRIAN, ALBUÅ¢ AURELIAN
F.E.M. ANALYSIS OF THE FRACTURE CONDITIONSAT THIN WALL ALUMINIUM PIPES
Section II - Optimization Of Thermal, Hydraulic And Pneumatic Equipment
Abstracts: 11 records
