Modelling And Optimization In The Machines Building Field

ℹ️ About

Change of Journal Name: Modelling and Optimization in the Machines Building Field becomes the Journal of Engineering Studies and Research

Modelling and Optimization in the Machines Building Field was born in 1995 as a technical journal, published in Romanian. In fact, the journal abbreviation, MOCM, is from the original name, Modelare si Optimizare in Constructia de Masini.
Initially, the journal had only one number per year. Since 2005, the journal appears with four issues per year, and a growing topic. In recent years, the journal’s editorial team has been enriched with numerous personalities from Romania and abroad, has defined the aims and scope. It was established a new policy on ethics in research and peer-review process was improved.
Considering the development of the journal has become increasingly clear that its name is no longer consistent with the intended purpose. In these conditions, the editorial team has proposed a name to match the magazine scope: Journal of Engineering Studies and Research (JESR).
JESR publishes the most recent theoretical and experimental studies concerning the topical and perspective problems in the conception and manufacturing fields of the technological plants and equipments, focusing but not limiting on:

1. Industrial Engineering
2. Mechanical Engineering and Mechatronic
3. Technologies and Equipment from Process Industries
4. Environmental Engineering and Environmental Protection
5. Engineering and Management
6. Applied Engineering Sciences
7. Materials Science and Engineering
8. Electrical and Electronic Engineering
9. Automation, Computers and Information Technology
10. Chemical Engineering

👥 Editorial board

• Prof. dr. Valentin Nedeff – University of Bacău - Chief Editor
• Prof. dr. Gheorghe Pintilie - University of Bacău
• Prof. assoc. dr. Luminița Bibire- University of Bacău
• Prof. dr. Valentin Zichil – University of Bacău
• Prof. assoc. dr. Dan Rotar - University of Bacău

✍️ Instructions for authors

Language: Papers will be published in either American or British English. The text appearing in figures and tables must be in English.
Title of the paper: all caps, bold, centered, 20 mm below upper margin, one column 130 mm width, font Times Roman 12 pts. Enter 2 clear lines after title.
Author(s) last and first name (without title or profession): all caps, bold, centered, on one centered column 130 mm width, font Times Roman, 10 pts. Enter 1 clear line after authors.
Affiliation: italics, upper and lower cases, centered, on one centered column 130 mm width, font Times Roman, 10 pts. Enter 2 clear lines after affiliation.
Abstract: The abstract should contain 50 - 100 words, on one centered column of 130 mm width, font Times Roman, 10 pts, justified. Enter 2 clear lines after abstract.
Keywords: 3-10 keywords, on one centered column of 130 mm width, font Times Roman, 10 pts, left aligned. Enter 3 clear lines after keywords.
Chapter titles: all caps, bold, left aligned, font Times Roman, 10 pts numbered in Arabs. Enter one clear line after title. Subtitles: decimal numbering (i.e. 1.1, 1.2, 1.3,) left aligned, bold, Times Roman, 10 pts. Sub subtitles: decimal numbering (i.e. 1.1.1., 1.1.2., 1.1.3.,) left aligned,italic, Times Roman, 10 pts.
Paragraphs should be typed with no indentation, in Times Roman, 10 pts., single spaced, justified.
The paper should be written on standard A4 (297 x 210 mm) sheets, with 25 mm (left-right) and 35 mm (top-bottom) margins. Enter one clear line between paragraphs, and two clear lines between paragraph’s end and the next title.
Figures: included in text, numbered in Arabs. Each figure should have a caption placed below the picture, centered, Times Roman 10 pts. Use high quality pictures and drawings, black and white only. All illustrations should be numbered consecutively throughout the paper. Example: Fig. 1, Fig. 2 , etc.
Tables: included in text, numbered in Arabs. Each table should have a caption placed above the table, centered, Times Roman 10 pts. Example: Table 1.
Equations: centered, numbered in brackets ( ), flush right, one line above and one line below. Equation editor: Normal: 12 pt; Subscript/superscript: 9 pt; Sub-subscript: 8 pt; Symbol: 13 pt; Sub-symbol: 11 pt. Use fractional form of terms, unless the no fractional form is more suggestively. All equations should be numbered consecutively throughout the paper.
References: References should be numbered consecutively (numerals in square brackets) throughout the text. References should be listed in order of citation, at the end of the paper, after one clear line, numbered in square brackets [ ] in Times Roman 10 pts. References will be given in the original language, using only Roman alphabet (use transliteration if necessary). Standard citations for books [1], journal published papers [2], “Proceedings” published papers [3], patents [4], are as follows:
[1] Buzdugan, Gh., Izolarea antivibratorie, Ed. Academiei Romane, Bucuresti, 1993.
[2] Le Roux, J.P., Comparation of sphericity indices as related to the hydraulic equivalence of setting grains, Journal of sedimentary Research, vol. 67, no. 3, 1997, p. 527 – 530.
[3] Murariu, G., Dariescu, C., Dariescu, M. A., Interacting fields - a complet analytical solution, Proceedings of the VI-th International Conference “ComTi” Timisoara, Romania, 2003, p. 238-239.
[4] Smith, J., U.S. Patent 8,143,241, 1998.
The Scientific Committee reserves the right to reject those papers that have an improper scientific level, do not fit in the topics or are not edited according to the given instructions.
MAILING ADDRESS
UNIVERSITY OF BACĂU 
Faculty of Engineering
Calea Mărășești 157, RO-600115, Bacău
(With the mention “For MOCM”)
email: mocm@ub.ro

🔍 Review process

Papers should be submitted to the Editor-in-Chief, either by e-mail, as attached document, either by regular mail, on compact disk. The documents should be edited in Microsoft Word. Received papers are first analyzed by the chief editor, in order to see if the paper fits the topics of the journal. Out of topic papers will be returned to the authors.

After this preliminary step, papers that fit into journal’s topic are send for evaluation to two independent scientific reviewers, experts in the article’s field. Reviewers’ identity is undisclosed to the authors. Reviewers give to the editor in chief their opinion on the scientific content of the paper and on the opportunity of publishing (Refereeing Form). Editor in chief will summarize reviewers’ observations and will communicate them to the corresponding author. If the reviewers have contrary opinions upon a paper, the editor in chief may submit the paper to a third referee. Taking into account the opinions of all referees, the editor in chief decides on the accepting/accepting with corrections/rejecting of the paper and communicates it to the corresponding author.

Submission of an article implies that all data and results are real and original and the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the copyright-holder.

By submitting the manuscript, the authors agree that the copyright for their article is transferred to the Publisher if and when the article is accepted for publication. The copyright covers the exclusive rights to reproduce and distribute the article including reprints, photographic reproductions, microform, electronic documents or any other reproductions of similar nature and translations.

📞 Contact

University of Bacău

Centers of Research: Physical Engineering and Environmental Engineering; Mechanical Engineering; Power Engineering, Mecatronics, IT

Calea Mărăşeşti, Nr. 157, 600115, Bacău, ROMANIA

Phone: +40.234.580170, +40 234 542 411

Fax:  + 40.234.580170, +40 234 545 753

E-mail: mocm@ub.ro